专业代理MICROCHIP单片机 芯片IC 光耦 MOS管 场效应管 可控硅 整流桥 桥堆 二极管 三极管
中文规格书,应用技术资料,PDF下载

客服电话:0512-50710709 | 首页 | 联系我们 | 网站地图 | 收藏本站

网站首页 产品展示 品牌导航 技术资料 公司简介 帮助中心 联系我们
联系方式

总 机:0512-50710709
手 机:15950933050
微信:15950933050
业务QQ:41086900
技术QQ:1723916736
E-mail:master@ksmcu.com

最近浏览元件
相同品牌元件

MIC29302WU

HM3085EESA

IQS227AS

ME8204BM6G

HL2202S

更多...

  您的位置: 首页 >> 集成电路 >> 东森微 >> EN25QH64A
EN25QH64A图片

EN25QH64A
元件品牌:东森微
元件型号:EN25QH64A
采购数量:
 

详细参数

The EN25QH64A is a 64 Megabit (8,192K-byte) Serial Flash memory, with advanced write protection
mechanisms. The EN25QH64A supports the single bit and four bits serial input and output commandsvia standard Serial Peripheral Interface (SPI) pins: Serial Clock, Chip Select, Serial DQ0 (DI) and DQ1(DO), DQ2(WP#) and DQ3(HOLD#/RESET#). SPI clock frequencies of up to 104MHz are supportedallowing equivalent clock rates of 416MHz (104Mhz x 4) for Quad Output while using the Quad Output Read instructions. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
The EN25QH64A also offers a sophisticated method for protecting individual blocks against erroneous or malicious program and erase operations. By providing the ability to individually protect and unprotect blocks, a system can unprotect a specific block to modify its contents while keeping the remaining blocks of the memory array securely protected. This is useful in applications where program code is patched or updated on a subroutine or module basis or in applications where data storage segments
need to be modified without running the risk of errant modifications to the program code segments.
The EN25QH64A is designed to allow either single Sector/Block at a time or full chip erase operation.
The EN25QH64A can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block.

FEATURES
· Single power supply operation
- Full voltage range: 2.7-3.6 volt
· Serial Interface Architecture
- SPI Compatible: Mode 0 and Mode 3
· 64 M-bit Serial Flash
- 64 M-bit / 8,192 KByte /32,768 pages
- 256 bytes per programmable page
· Standard, Dual or Quad SPI
- Standard SPI: CLK, CS#, DI, DO, WP#,
HOLD#/RESET#
- Dual SPI: CLK, CS#, DQ0, DQ1, WP#,
HOLD#/RESET#
- Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3
- Configurable dummy cycle number
· High performance
- Normal read
- 83MHz
- Fast read
- Standard SPI: 104MHz with 1 dummy bytes
- Dual SPI: 104MHz with 1 dummy bytes
- Quad SPI: 104MHz with 3 dummy bytes
· Low power consumption
- 5 mA typical active current
- 1mA typical power down current
· Uniform Sector Architecture:
- 2048 sectors of 4-Kbyte
- 256 blocks of 32-Kbyte
- 128 blocks of 64-Kbyte
- Any sector or block can be erased individually
· Software and Hardware Write Protection:
- Write Protect all or portion of memory viasoftware
- Enable/Disable protection with WP# pin
· Software and Hardware Reset
· High performance program/erase speed
- Page program time: 0.5ms typical
- Sector erase time: 40ms typical
- Half Block erase time 200ms typical
- Block erase time 300ms typical
- Chip erase time: 32 Seconds typical
· Volatile Status Register Bits.
· Lockable 512 byte OTP security sector
· Read Unique ID Number
· Minimum 100K endurance cycle
· Data retention time 20 years
· Package Options
- 8 pins SOP 200mil body width
- 8 contact VDFN(5x6mm)
- 8 pins PDIP
- 16 pins SOP 300mil body width
- 24 balls TFBGA (6x8mm)
- 8 contact VDFN (6x8mm)
- All Pb-free packages are compliant RoHS,
Halogen-Free and REACH.
· Industrial temperature Range

我司不但为您提供可靠的EN25QH64A集成电路,还可提供EN25QH64A应用资料、各类认证证书及产品研发等技术支持!
专 业 、 专 注 、 诚 信 -- 我 们 只 为 您 的 产 品 更 可 靠 !

诚信通店  淘宝店  
Copyright 2018 ksmcu.com. All Rights Reserved.版权所有:昆山东森微电子有限公司 客户服务热线:0512-50710709 传真:0512-50111209
客户服务邮箱:master@ksmcu.com 苏ICP备09041038号