dsPIC30F5015-20I/PT是MICROCHIP的一款16位数字信号控制器带66 KB闪存 采用64引脚TQFP封装.

制造商零件编号:DSPIC30F5015-30I/PT
安装方法:Surface Mount
封装形式：TQFP-64
包装：TRAY
标准包装数量:160

DSPIC30F5015-30I/PT产品亮点
•Family Name:dsPIC30F
•Core Processor:dsPIC
•Program Memory Type:Flash
•Flash Size (Bytes):66 kB
•RAM Size:2 kB
•Speed:40 MHz
•No of I/O Lines:52
•InterfaceType / Connectivity:CAN / I2C / SPI / UART
•Peripherals:CAN / I2C / SPI / UART / On-Chip-ADC / PWM / Watchdog
•Number Of Timers:5
•Supply Voltage:2.5 to 5.5 V
•Operating Temperature:-40 to +85 °C
•On-Chip ADC:16-chx10-bit
•Watchdog:1

High-Performance Modified RISC CPU:
• Modified Harvard architecture
• C compiler optimized instruction set architecture with flexible Addressing modes
• 83 base instructions
• 24-bit wide instructions, 16-bit wide data path
• 66 Kbytes on-chip Flash program space(Instruction words)
• 2 Kbytes of on-chip data RAM
• 1 Kbyte of nonvolatile data EEPROM
• Up to 30 MIPS operation:
- DC to 40 MHz external clock input
- 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
• 36 interrupt sources:
- Five external interrupt sources
- Eight user-selectable priority levels for each interrupt source
- Four processor trap sources
• 16 x 16-bit working register array DSP Engine Features:
• Dual data fetch
• Accumulator write back for DSP operations
• Modulo and Bit-Reversed Addressing modes
• Two 40-bit wide accumulators with optional saturation logic
• 17-bit x 17-bit single-cycle hardware fractional/integer multiplier
• All DSP instructions single cycle
• ±16-bit single-cycle shift
Peripheral Features:
• High-current sink/source I/O pins: 25 mA/25 mA
• Timer module with programmable prescaler:
- Five 16-bit timers/counters; optionally pair 16-bit timers into 32-bit timer modules
• 16-bit Capture input functions
• 16-bit Compare/PWM output functions
• 3-wire SPI modules (supports four Frame modes)
• I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
• UART module with FIFO Buffers
• CAN module, 2.0B compliant
Motor Control PWM Module Features:
• Eight PWM output channels
- Complementary or Independent Output modes
- Edge and Center-Aligned modes
• Four duty cycle generators
• Dedicated time base
• Programmable output polarity
• Dead-Time control for Complementary mode
• Manual output control
• Trigger for A/D conversions Quadrature Encoder Interface Module
Features:
• Phase A, Phase B and Index Pulse input
• 16-bit up/down position counter
• Count direction status
• Position Measurement (x2 and x4) mode
• Programmable digital noise filters on inputs
• Alternate 16-bit Timer/Counter mode
• Interrupt on position counter rollover/underflow
Analog Features:
• 10-bit Analog-to-Digital Converter (ADC) with 4 S/H Inputs:
- 1 Msps conversion rate
- 16 input channels
- Conversion available during Sleep and Idle
• Programmable Brown-out Reset